Technical data

14
3 in 1 Cordless lawn mower WG780E
The best time to mow grass is in the late afternoon
when the grass is dry and the newly cut area will not
be exposed to direct sunlight.
2) For best mulching performance, set the cutting
height to remove about one third of the grass blade
length, ideally no more than 38mm at one time.
If the lawn is overgrown, it may be necessary to
increase the cut height to reduce the pushing effort
and prevent overloading the motor. For extremely
heavy mulching, it is advisable to first cut at a high
cut height setting, and then re-cut to the final cut
height. Otherwise, make narrower cuts and mow
slowly.
3) For best performance, keep the mower housing free
of built-up grass. From time to time turn off mower
and wait for the blade to come to a complete stop.
Then unplug the safety key and turn mower on its
side. Using an object such as a stick, wipe out any
accumulation of grass in the blade area. Be careful
of the sharp edges of the blade. Clean often in wet,
new grass, and always after every use.
4) Certain types of grass or grass conditions may
require that an area be mulched a second time to
fully disperse the grass throughout the lawn.
If cutting a second time, it is advisable to cut
perpendicular (across) the first cut pattern. DO NOT
CHANGE CUT PATTERN IN ANY WAY
THAT WOULD CAUSE MOWING DOWN A HILL.
5) Change your cutting pattern from week to week. This
will help prevent matting and graining of the lawn.
MAINTENANCE
WARNING: Stop the mower and remove the
safety key before removing the grass bag.
NOTE: To ensure long and reliable service, perform the
following maintenance procedures regularly. Check
for obvious defects such as a loose, dislodged or a
damaged blade, loose fittings, and worn or damaged
components. Check that the covers and guards are
all undamaged and are correctly attached to mower.
Carry out any necessary maintenance or repairs before
operating mower. If the mower should happen to fail
despite regular maintenance, please call our customer
helpline for advice.
BLADE SHARPENING
KEEP BLADE SHARP FOR BEST MOWER
PERFORMANCE. A DULL BLADE DOES NOT CUT
GRASS CLEANLY OR MULCH PROPERLY.