Technical data

12
3 in 1 Cordless lawn mower WG780E
12
12
13
J
K1
K2
L1
2. BATTERY STATUS LED’S (See J)
NOTE: Battery Status LED’s are not active in
charging mode. The Status LED’s will indicate the
battery condition when the button on the battery
is pressed.
The LED’s constantly senses and displays the battery
condition as follows:
Press the button “POWERTEST”, the light button is
illuminated.
When the three green lights are illuminated, the battery
is in a highly charged condition.
When two lights ( ) are illuminated, the battery is in
a moderately charged condition.
When only one green light ( ) is illuminated, the
battery charge is depleted.
Before using your new mower for the first time, it is
recommended that the unit be charged overnight to
ensure that the battery is fully charged.
IMPORTANT
When only one light is illuminated, your battery
is overly discharged, even though the mower
may still be capable of cutting grass. Continuing
to operate your lawnmower with the battery in
this discharged condition may reduce the life and
performance of your battery.
3. REMOVING MULCH INSERT (See K1)
To remove the mulching insert so that you can bag the
grass or discharge with the optional discharge chute,
follow the steps listed below:
1) Shut the mower off, wait until the blade stops and
remove the safety key.
2) Raise the safety guard and hold it up.
3) Grasp the middle of the insert, lift and pull out the
mulching insert completely.
4) The safety guard is spring loaded. When you release
it, the guard will return to the closed position.
4. INSTALLING MULCH INSERT (See K2)
1) Turn the mower off, wait until the blade stops and
remove the safety key.
2) Raise the safety guard and hold it up.
3) Slide the mulching insert into the discharge opening
until it is firmly in contact with the deck.
4) Release safety guard and ensure it is properly
closed.
5. SIDE-DISCHARGE COVER (See L1 & L2)
Using the mulching insert and side-discharge insert, the
grass can be discharged from the side- discharge of the