Technical data

3 in 1 Cordless lawn mower WG780E

6. ADJUSTING THE CUTTING HEIGHT (See H)

WARNING! Stop, release switch lever and wait

until the motor stops before adjusting height. The

blades continue to rotate after the machine is switched

off, a rotating blade can cause injury.

CAUTION: Do not touch rotating blades.

For the first cutting of the season, a high cutting

adjustment should be selected.

The lawnmower can be set to 6 cutting heights

between 38mm and 88mm. For this purpose, move the

cutting height adjustment lever outwards then adjust to

the preferred position.

OPERATION

1. STARTING AND STOPPING (See I)

WARNING! The blade continues to rotate for a

few seconds after the machine is switched off.

Allow the motor/blade to stop rotating before switching

“on” again. Do not rapidly switch off and on.

STARTING

TO START ENGINE

1. Insert Key

2. Push Key

3. Pull bar

1) Insert safety key into the housing of the switch box.

2) Push down the key, until safety key is fully seated

inside housing.

3) Press and hold the safety key, squeeze the switch

lever bar towards the handle and the mower will

start.

4) Release the safety key.

STOPPING

Release the switch lever bar.