Technical data

19
WG307E WG308E
Limbing and Trimming
Electric Chain Saw
6. One hand should firmly grip the push handle of the
extension pole. The other hand should hold the metal
portion of the pole or the sliding handle on the pole
(See Fig. AC).
7. Complete the cut as described in “Trimming
Br anc he s”.
8. At the completion of the cut, be ready to
immediately support the weight of the entire tool as
the branch falls.
WARNING: Do not let the JawSaw fall to
the ground at the completion of the cut,
this may damage the tool.
SAW MAINTENANCE AND
KICKBACK SAFETY
Follow maintenance instructions in this manual.
Proper cleaning of saw and chain, and guide bar
maintenance, can reduce chances of kickback. Inspect
and maintain saw after each use. This will increase
the service life of your saw.
NOTE: Even with proper sharpening, risk of kickback
can increase with each sharpening.
MAINTENANCE AND STORAGE OF
JAWSAW
1. Unplug the JawSaw from power source:
• Whennotinuse.
• Whentransporting.
• Whenleftunattended.
• Beforeservicing.
• Beforettingtheextensionpole.
• Beforecleaning.
• Beforechangingaccessoriesorattachments,such
as saw chain and guard.
2. Inspect the saw before and after each use for:
• Anysignsofdamage,especiallythepowercord.
• Smoothactionofpushhandleandmovementof
bar.
• Adequatechaintension.
• Adequatechainlubrication.
3. Do not use the JawSaw, if:
• Thetriggerswitchorlockoutismalfunctioning.
• Thepushhandledoesnotsmoothlyreturnunder
spring force.
• Anyotherdamagewhichaffectsthesafetyor
operation is evident.
1
1/3
2
2/3
1
1/3
2
2/3
Z
Y
kg
Z
Y
I
II
20
1
Q
S
R2
R1
T
W
V
U
X
Z2
Z1
Y
Z3
AA
Z5
Z4
AB1
AB4
AB3
AB2
h
i
AC
AD