User's Manual

3
/
8
” /10mm Drill WT100K
TECHNICAL DATA
Voltage: 120 V ~ 60Hz
Rated Current: 6.0 A
No Load Speed: 0-2,500rpm
Double Insulated:
Chuck Capacity: 3/8”(10mm)
Maximum Drilling Capacity:
Wood: 1” (25mm)
Steel: 3/8” (10mm)
Machine Weight: 3.25lbs (1.5Kg)
ACCESSORIES
We recommend that you purchase your accessories from the same store that sold
you the tool. Use good quality accessories marked with a well-known brand name.
Choose the type according to the work you intend to undertake. Refer to the accessory
packaging for further details. Store personnel can assist you and offer advice.
EXTENSION CORDS
Warning: Use proper extension cords. Make sure your extension cord is in good
condition and is a 3-wire extension cord which has a 3-prong grounding type
plug and matching receptacle which will accept the machine’s plug. When using an
extension cord, de sure to use one heavy enough to carry the current of the machine.
An undersized cord will cause a drop in line voltage, resulting in loss of power and
overheating. If in doubt, use the next heavier gauge. The smaller the gauge number,
the heavier the cord.
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT ALTERNATING CURRENT
TOOLS
Tool’s
Ampere
Rating
3-6
6-8
8-10
10-12
12-16
Cord Size in A.W.G. Wire Sizes in mm
2
Cord Length in Feet
25 50 100 150
Feet to Meters
15 30 60 120
18 16 16 14
18 16 14 12
18 16 14 12
16 16 14 12
14 12 - -
.75 .75 1.5 2.5
.75 1.0 2.5 4.0
.75 1.0 2.5 4.0
1.0 2.5 4.0 -
- - - -
0706
NA-WT100K C20-M-050727.indd 7 2005-7-27 17:48:10