User's Manual

6-6
by pressing the end key on the terminal. A
termID+CR will be sent to the host.
InputYesNo
Parameters: basename, channel, terminal, line, position, prompt
Function: This instructs the terminal attached to client
basename on channel to display the prompt at line
and position and wait for a Yes (Enter key or C
key) or a No (0 key or B key) from the terminal
keypad.
Note: C and B keys are used to facilitate keypad
entry while scanning with the integrated laser.
InputPassword
Parameters: basename, channel, terminal, line, position,
prompt, shifted
Function: This instructs the terminal attached to client
basename on channel to display the prompt at line
and position and wait for data to be entered from
the terminal keypad only. The entered data is not
displayed on the terminal.
InputSerial
Parameters: basename, channel, terminal, line, position, prompt
Function: This instructs the terminal attached to client
basename on channel to display the prompt at line
and position and wait for data to be received
through the terminal serial port. Waiting for serial
input can be bypassed by pressing the enter key on
the terminal which will send an empty data string to
the host (fires the
OnTermData event handler).
OutputSerial
Parameters: basename, channel, terminal, data
Function: This instructs the terminal attached to client
basename on channel to send data to the terminal’s
serial port. Data must be less than 231 characters in
length for each call to
OutputSerial.
SendDisplay
Parameters: basename, channel, terminal, line, position, prompt
Function: This instructs the terminal attached to client
basename on channel to display the prompt at line