User's Manual

USB Installation

Before connecting to a USB port, first plug one of the Worth Data 5v

regulated power supply into the Base Station. (REMEMBER, any other brand

will damage the Base Station.) The Base Station will power up with 3 more

flashes than the channel setting; i.e. if it is set on Channel 0, it will flash green

three times. If the Channel were set to 7, it would flash green 10 times.

Now connect the USB port to the Base Station. The Base Station will be

automatically sensed and the driver installation will begin. Windows can

usually find the necessary driver on the hard drive under /Windows/System

32/Drivers; occasionally you will have to insert the original Windows CD. The

Mac always finds the driver. In either case, the driver used is the standard

keyboard driver. No special drivers are required.

You should be connected as below:

If mistakenly abort your driver installation, see the Trouble Shooting Section

of this manual.

For testing, bring up Notepad or WordPad on your computer and scan the

TEST LABEL on page 23. Now turn to page 8.