User's Manual

Table Of Contents
6-18
ClearLine
Parameters: line
Function: This instructs the ActiveTerminal to clear the specified
line on its display. Must be followed by an "Input" method
call to take effect.
SendDate
Parameters: line
Function: This instructs the ActiveTerminal to display date and time
on the specified line number. Must be followed by an
"Input" method call to take effect.
Beep
Parameters: count
Function: This instructs the ActiveTerminal to beep count times.
Count may be a value from 1 to 9. Must be followed by an
"Input" method call to take effect.
PlayVoice
Parameters: msgnum
Function: This instructs the ActiveTerminal to play voice message
number msgnum. Msgnum may be a value from 1 to 99.
Must be followed by an "Input" method call to take effect.
ReInit
Function: This instructs the ActiveTerminal to re-initialize. Must be
followed by an "Input" method call to take effect.
NOTE: Base Stations using EEPROM versions prior to
9079 will cause the message "Base Reinitialized.." to be
displayed on the terminal. Only the terminal has actually
been re-initialized. Later Base Stations use the message
"Buffer Reinitialized..." to indicate a single terminal re-
initialization.
ReInitAll
Function: Instructs all attached terminals to re-initialize.