Owner`s manual

Click on the “Export To Excel” button to download the data you just collected directly into Excel running
on your computer.
Connection Host
Since your terminal comes configured by default to access Worth Data's Test Cloud Server, you must make
some changes to the Terminal's WIFI configuration settings. Of course, you must first configure your
Terminal to connect with an access point on your LAN.
The settings that determine what server you use that are are in (from your Terminal's main screen):
SETUP → WIFI CONFIGURATION → CONNECTION HOST CONFIG
To access the Worth Data Connection Host Demo, make sure your Terminal's CONNECTION HOST
CONFIG is set as follows:
CONNECTION HOST URL: www.worthdata.net/connect/terminal.php
USERNAME: demo
PASSWORD: password
SERVER ID: Worth Data Demo
Once you have an internet connection with your Terminal, all you have to so is SIGN ON. When you do,
assuming everything is working properly with your Terminal, you will see a prompt.
61
See the chapter on RF System Setup to configure the Terminal to connect to your access point.