Owner`s manual

When the Test Server and Local Connection Host start, they are automatically running and pre-configured.
All you have to do is configure your Terminal to communicate with the Local Connection Host (as outlined
above).
If you click on the “Stop Server” button in the Test Server window, the Local Connection Host will shut
down and the Test Server will set itself to connect with Worth Data's web-based Connection Host, rather
than the Local Connection Host.
When you then click on “Start
Server” button (once it becomes
enabled), you will see a notice
informing you of this.
When you start the Test Server, you will see that it has a number of setup options that can be useful if you
want to test , for example, your own web-based Connection Host installation:
Connection Host URL
User Name
Password
Server ID
as well as some options for “On Data” and “Log Display”.
55