Owner`s manual

If you have difficulty somewhere in the area, as long as that area is in an area of overlapped coverage that a

different position of the Access Point covers, you won't have a problem. If you find a spot that none of the

planned Access Point locations will cover, you will have to move one of the Access Points closer to the

problem spot or plan on adding another closer Access Point. It is best to locate the Access Point in the center

as high as possible of the area you intend coverage. The weakest signal will be directly under an access

point, (if the antenna is vertical).

Avoid locating antennas close to large metal objects such as filing cabinets, microwave ovens, 2.4GHz

cordless phones, or large containers of water. Avoid placing antennas close to an outside wall to minimize

signal efficiency. If you need to have coverage outside, place it next to a window. Once you have

determined the Access Points and their locations, you are ready to wire the Access Points to the LAN.

To perform a Site Test, turn the unit on and get to the "Mode Menu" which displays as follows:

1. SIGN ON

2. SETUP

3. SITE SURVEY

Press the 3 key to start the Site Survey.