Manualshelf

Owner`s manual

ManualsBrandsWorth Data ManualsBarcode Reader5000 TriCoder s
11121314151617181920
The gateway IP address is generally the IP address of your DSL or cable modem/router on your LAN.
Options
In most cases, the gateway address is supplied by a DHCP server, but if not you can enter one. A typical
address is 192.168.0.1; you can check your computer settings and match that.
DNS Server IP Address 000.000.000.000
Default: 000.000.000.000
Description
A DNS server is any computer registered to join the Domain Name System. A DNS server runs special-
purpose networking software, features a public IP address, and contains a database of network names and
addresses for other Internet hosts.
A DNS server is usually hosted by an internet service provider, running on the internet. It is possible you
have a local DNS server running on your LAN (but if you do you probably know exactly what you are
doing and don't need to read this).
DNS servers resolve website names like “www.barcodehq.com” into an actual internet address code (an IP
address) like “68.142.213.151”. You can see that the IP address works just like the name by entering the IP
address in your browser.
Options
If your Connection Host address is a name rather than an IP address number, then you will need to make
sure you have specified the DNS Server Address.
If you have DHCP enabled, most DHCP servers provide the DNS server setting. If you are not using DHCP,
the easiest way to find out your DNS server address is to review your computer's network summary details.
If you are having difficulty determining what you need to put here, or finding the DNS server address
setting on your computer, you will need to consult with someone familiar with these settings.
Access Point Configuration
SSID <blank>
Default: <blank>
Description
The SSID, or Service Set IDentification, is the code name your WiFi router broadcasts to identify the name
of the network it supports. Some installation “hide” the SSID, that is the WiFi router is set to not broadcast
it. In this case, you still need to know what it is.
Options
Set the SSID to match the SSID of the network that the Terminal will be connected to. If the SSID is not
17