User guide

19
Programming the Keyboard
If your keyboard wasn’t programmed at the time of installation or if you want to use a different TV set for your
WorldGate service, you will need to program the keyboard to recognize your TV.
To program the TV:
1. Find the code number for your TV in the TV Code List below. If more than one code is listed for your
TV, use the code listed first.
2. On your WorldGate keyboard, press and hold the left Alt key, the Select key, and the TV Power key at
the same time. Hold these keys for at least 3 seconds, until the Low Batt light blinks twice.
3. Using the number keys on the keyboard (the top row of “typewriter” keys), enter the three-digit
television code number for your TV set
4. Press Enter. If you have entered a valid code, the Low Batt light will blink twice. (If the light doesn’t
blink, repeat steps 2 - 4, making sure you enter the correct code numbers.)
5. Aim the keyboard at the TV and press the TV Power key. If the TV comes on, you have programmed
the keyboard correctly. If the TV doesn’t respond, try using the remaining codes listed for your TV and
repeat steps 2 - 4, trying each code listed for your TV until you find the one that operates it. If your TV
still doesn’t work with the keyboard, try searching for the proper code. (see To search for a TV code
below)
6. When you have successfully programmed the keyboard for your TV, write down the correct code for
future reference.
Note: If you press the TV Power, CH +, or CH – keys by mistake in step 3 instead of pressing a number
key, the keyboard enters the code search mode. Begin again with step 2.
To search for a TV code:
1. Turn off the TV.
2. On the WorldGate keyboard, press the left Alt key, the Select key, and the TV Power key all at the
same time.
3. Hold the keys for at least 3 seconds, until the LED indicator blinks twice.
4. Turn on the TV manually, using the controls on the TV (do not use the remote).
5. Aim the keyboard at the TV. Press and hold TV Power until the TV turns off. The keyboard will search
all available codes to find one that works with your TV – this could take more than a minute.
6. Immediately after the TV turns off, release the TV Power key. Slowly press the CH- key a few times
(do not hold) until the TV turns on.
7. Press Enter to store the TV code.
8. Verify the code by aiming the keyboard at the TV and pressing Power.
9. If the TV does not respond, repeat steps 1-8.
Television Codes
ADMIRAL 021, 034, 035, 083, 099, 114, 224, 307, 316, 321, 330
ADYSON 107, 128, 132
AIKO 021,081,107, 128
AIWA 013, 015, 032, 033, 132
AKAI 006, 009, 021, 027, 031, 035, 050, 053,073, 093,