User`s manual

3.2.5 XG
Press CTRL ASSIGN and OCTAVE buttons at the same time(25)/XG ON button (49 and 61)to send GM ON message
(F0 43 10 4C 00 00 7E 00 F7).LCD shows ‘XG ON’ when the message is sent. The LCD displays the following:
3.2.6 Reset
Press PROGRAM and SHIFT buttons at the same time(25)/RESET button (49 and 61) to reset the system restoring to
f actory setting, sending system initial setting info at the same time.
3.2.7 SNAP SHOT
Press CHAN and PROG buttons at the same time(25)/SANP button (49 and 61) to send message of all user settings.
3.3.1 MEMORY
Press the MEMORY button. The system enters the storing state, it stores
6 groups setup value. Using the NUMERIC button1~6 to select the memory area.
Press ENTER to store the control setting. The LCD displays the following；
3.3.2 RECALL
Press the RECALL button, The system enters the recall state. Using the
NUMERIC button 1~6 to select the memory area. Press ENTER to recall the parameters
3.3 Memory and data call back
The LCD displays the following:
11
LCD shows SNAP when the message is sent. The LCD displays the following: