User's Manual

COMMUNICATION CERTIFICATION LABORATORY TEST REPORT: 73-6907
FCC ID: NQE-900UHOPPER
Page 73 of 103
Exhibit 8
3. Click on the “Terminal” button to open the terminal test window. You should see
the screen as shown below.
4. Go to the Settings… drop down box and select a baud rate of 19,200. Also select
the New Line check box, this will cause the cursor to advance to a new line each
time a carriage return is received.
5. Setup the second radio in the same manner.
6. Type text to communicate between the terminals or PC’s and verify proper radio
operation.
v