User's Manual

COMMUNICATION CERTIFICATION LABORATORY TEST REPORT: 73-6848
FCC ID: NQE-900SSHOPPER
Page 79 of 109
Exhibit 8
The transceiver also provides visual indication of proper operation and valid packet
reception using on-board LED indicators.
v
Programming and Configuring Selections
Commands are accepted by the radio when it is in “configure” mode. On the figure of
the main menu shown above, “Configure” toggles with “Disconnect.” Select
“configure”, make changes as desired, and select “Write.” Your radio is configured.
Select “TX On” to transmit.
Basic Commands