User Manual

COMMUNICATION CERTIFICATION LABORATORY TEST REPORT: 73-6560

FCC ID: NQE1005

Receiver and System Description

The NQE1005 is the companion to the WinGate 2000 Receiver from

World Wireless Communications. This receiver fast scans all

twenty-five channels listed in the hopping table. If valid data

is detected from one of the Transmitters it stays on that channel

long enough to accept an entire packet of data. The on board

processor then passes the data out to a data collection system

and continues to scan for the next transmitter. After each

transmission the transmitters advance to the next frequency in

the hopping table. When the input count is reached a new packet

is sent. This completes the cycle. One typical implementation is

illustrated below.

Typical System Using the NQE1005 Transmitters

Data Collection

Logic and Control

Board

RS232

RS485

other

Data Collection

Interfaces

Two Way Pager

Meters

or other

devices

ANT

TIM

Transmitter

ANT

Meters

or other

devices

multiple

TIM'S

TIM

Transmitter

ANT

Wingate 2000

TIM

Receiver