Installation Manual

COMMUNICATION CERTIFICATION LABORATORY TEST REPORT: 73-6560
FCC ID: NQE1005
Note to Installers:
Must not install this equipment in locations that could cause RF
exposure to persons where the distance is lees than 20
centimeters.
Hardware Requirements
Antennas:
Built in: no connection required
Power Supply:
The NQE1005 Transmitter is a sealed unit with internal lithium
3.6-volt batteries. Designed for 10-year service under normal
conditions. No maintenance required.
To insure battery freshness connection to internal circuitry is
made by external jumper as shown in figure 2.
3V battery
6
5
4
3
2
1
Figure: 2
Contact in meter
900 MHz Transmitter
Division Reg
Debounce Time
Preset Cnt
NV Memory
CPU
Count
accumulator