Manualshelf

Instruction manual

ManualsBrandsWorld Precision Instruments ManualsAmplifierBiological Signals Amplifier
71727374757677787980
5 Analysis 69
Table
Functions
These functions are available in the XY window.
General Y1: Value of Y-Axis Channel at Cursor 1.
Y2: Value of Y-Axis Channel at Cursor 2.
X1: Value of X-Axis Channel at Cursor 1.
X2: Value of X-Axis Channel at Cursor 2.
Y2-Y1: The difference in value of Y-Axis channel between the cursors.
X2-X1: The difference in value of X-Axis channel between the cursors.
MaxY: Maximum value of Y-Axis channel between the cursors.
MinY: Minimum value of Y-Axis channel between the cursors.
MeanY: Mean or Average value of Y-Axis channel between the cursors.
MaxY-MinY: Difference between the maximum and minimum values of Y-Axis channel between
the cursors
MaxX: Maximum value of X-Axis channel between the cursors.
MinX: Minimum value of X-Axis channel between the cursors.
MeanX: Mean or Average value of X-Axis channel between the cursors.
MaxX-MinX: Difference between the maximum and minimum values of X-Axis channel
between the cursors.
Length: Length of the line segment in the XY-plot between the two cursors.
Derivative dY1/dx: Slope of the XY-Plot at Cursor 1.
dY2/dx: Slope of the XY-Plot Cursor2.
Max dV/dt: Maximum slope of the XY-Plot between the two cursors.
Min dV/dt: Minimum slope of the XY-Plot between the two cursors.
Mean dV/dt: Mean slope of the XY-Plot between the two cursors. This is also the slope of the
line of best fit for all the data points between the cursors.
Integral (Area) All the integral and area functions are calculated as integrals.
Area wrt Ymin: The minimum value of the Y channel is taken as baseline and the area of all
points between the two cursors is calculated with respect to this baseline.
Area wrt Zero: Zero is taken as baseline and the area of all points between the two cursors is
calculated with respect to this baseline.
Area wrt Y1: The value of the Y channel at cursor1 is taken as baseline and the area of all
points between the two cursors is calculated with respect to this baseline.
Area Loop: The area of the loop as defined by the position of two cursors is calculated.