Instruction manual

5 Analysis 55
CrossTime
Channel
Calculation
Initial Delay: The amount of time from the start of recording until the function is initiated.
Selection Duration: Period of the protocol.
To setup CrosstimeChannelCalculation, you need to setup the Initial Delay before the
function is initiated and set the Selection Duration to the period of the protocol. Selection can
be set to start when the data on a selected channel goes above an operator selected value.
For each selection as defined above, variable A can be setup to equal the mean, maximum, or
minimum of the data between the selected time range on a selected channel. Variables B,C and
D can be setup in similar fashion.
The title and units name of the computed channel can be set. The variables A,B,C,D and the
calculator can be used to create an equation for the computed channel.