Instruction manual

4 Controls 43
Units: Used to convert two raw data values to two corresponding calculated values, using a
linear scale. For more information refer to the Units Conversion section
Color: Sets the color of the channel.
Stimulator Page Used to setup the Stimulator(s) on the WPI 214/118. There are five modes: Off, Pulses,
Trains, Constant and Step. The available parameters in each of these modes can be preset
and made part of a settings file.
Refer to the Stimulator section of the Input/Output chapter for information on the
programming of the stimulator.
Views Page Refer to the Display chapter for information on configuring this page.
Sequences Page Refer to the Digital Inputs and Digital Outputs sections of the Input/Output chapter for infor-
mation on configuring this page.
Options Page These settings are at the application level and will apply across different settings files.
Figure 4-14: Options page of the preferences dialog
Display: The colors and line thickness, etc. can be changed here.
MainWindowFunctions: Allows the user to select the functions available from the Main
window.
Data display precision: The number of digits of precision to be shown.
Data Separator: The data separator to be used for exporting data to the journal.
Maximum display points: The maximum number of data points that will be displayed.