Instruction manual

4 Controls 39
Check for Updates: Checks the DataTrax2.com website for the latest version of the software.
You need to be connected to the internet.
Toolbars
Main Toolbar
Figure 4-7: The toolbar in the DataTrax2 Main window.
New File: Opens a new file. Only one acquisition window may be open at a time.
Open File: Opens a previously recorded file.
Save File: Saves data to the file currently open.
Main Window: Brings the Main window to the foreground.
Analysis: Brings the Analysis window to the foreground.
XY View: Brings the XY View window to the foreground.
FFT (Spectrum): Brings the FFT window to the foreground.
Journal: Brings the Journal to the foreground.
Marks: Brings the marks list to the foreground.
Stimulator Preferences: Hides or displays the Stimulator toolbar.
Half Display Time; Reduces the time displayed on the screen by a factor of 1/2, each
time the icon is clicked.
Zoom between cursors: Zooms to the area selected by the two cursors.
Double Display Time: Increases the time displayed on the screen by a factor of two each
time the icon is clicked.
2 Cursor Mode: Click icon to display two cursors on the data window. Time and voltage
differences between the data points intersected by the cursors are measured.
Single Cursor Mode: Click icon to display one cursor on the data window. Absolute time
and voltage from the beginning of the trace to the cursor are displayed.
Views: (Shown in the above toolbar as default view).