Instruction manual

SI-H Muscle Testers

WORLD PRECISION IN STRU MENTS

Enabling/Disabling the Alarms

By default the alarms are disabled. When enabled, the unit will emit a beep when an

alarm state occurs.

1. Press the Setup button until “CH1 Alarm” or “CH2 Alarm” appears on the screen.

CH1 Alarm

DISABLED

Fig. 42 By default the alarms are disabled.

2. Press the Up or Down button to enable or disable the alarm.

3. Press the Display button to save the conﬁ guration and return to the normal display.

Using the USB Port Output

The USB port can be used to connect to a computer to log the temperature history. In

order to communicate with the computer, a terminal emulation program is required.

Several third party options are available, including: Hyperterminal, Real Term (realterm.

sourceforge.net) or Cool Term (freeware.the-meiers.org).

1. When you use a standard USB cable to connect the SI-TCM2 to your computer, the

computer will automatically install the necessary drivers.

2. Set up your terminal emulation program using the following parameters:

• Baud rate: 38400 Bd

• Data: 8 bits, (1 start, 1 stop)

• Parity: None

3. The comma delimited, output ﬁ le logs the temperature 10 times a second.