Operator`s manual

15
INSTRUCTIONS (continued)
MODELS MPF-900 & MPF-2000
——————————————————
The Models MPF-900 and MPF -2000 are for walk
behind Mini Skid Steer units equipped with the
"Universal" type attachment on the loader.
The Model MPF-900 can handle loads up to 900 Ib.
The Model MPF-2000 can handle loads up to 2,000 Ib.
Load ratings are figured with the load about half the
length of the tine in front of the fork frame and evenly dis-
tributed between the two fork tines.
Always make sure latch pins engage to lock the frame
in place.
Connection instructions are similar to the ones for reg-
ular size skid steer units. (See page 16.)
MODEL MPF-2000B/G
——————————————————
The Model MPF-2000 B/G is for Bobcat walk-behind
Mini Skid Steer units and the Bobcat S-70 small skid
steer unit. It is also for the Gehl Model 1640 small skid
steer.
The Model MPF-2000 B/G can handle loads up to 2000
lb. Check your unit's lift capacity before handling loads.
The load rating is figured with the load about 24" in front
of the fork frame and with the load evenly distributed
between the two fork tines.
Always check to make sure latch pins engage slots to
lock the frame in place.
Connection instructions are similar to the ones for reg-
ular sire skid steer units. (See page 16.)
OBEY ALL
SAFETY
WARNINGS!
Operate up and down slopes with the heavy end of
the machine uphill. Carrying a load with the pallet
fork attachment will make the front end heavy.
When going up or down hill, the machine could
overturn if the heavy end is toward the downhill side.
Someone may be pinned or seriously injured if the
machine overturns.
WARNING