Operator`s manual

10
SAFETY INSTRUCTIONS (continued)
Following operation, or when unhooking, stop the tractor, set the brakes, disengage the PTO, shut off the
engine and remove the ignition keys.
STORAGE SAFETY
Do not park equipment where it will be exposed to livestock for long periods of time. Damage and livestock
injury could result.
Store the unit in an area away from human activity. Do not permit children to play on or around the stored unit.
Make sure all parked machines are on a hard, level surface and engage all safety devices. Storage location
should be level and solid to make connecting and unconnecting to power unit easy.
Use extreme care to keep feet and hands from under the unit and clear of any pinch points. Never stand or
allow another person to stand between a running tractor and the unit when disconnecting the implement from
the tractor 3-point hitch.
Keep safety signs clean and legible at all times.
Replace safety signs that are missing or have become illegible.
Replaced parts that displayed a safety sign should also display the current sign.
Safety signs are available from your Distributor or Dealer Parts Department or the factory.
Be sure that the installation area is clean and dry. Be sure temperature is above 50°F (10°C).
Decide on the exact position before you remove the backing paper.
Remove the smallest portion of the split backing paper. Align the sign over the specified area and carefully
press the small portion with the exposed sticky backing in place.
Slowly peel back the remaining paper and carefully smooth the remaining portion of the sign in place. Small
air pockets can be pierced with a pin and smoothed out using the piece of sign backing paper.
How to Install Safety Signs:
SAFETY SIGNS