User Manual

ManualsBrandsWorkrite ManualsAccessories for videoWillow

#1500177 - Rev B

Important Safety Instructions

Read and understand all these safety instructions before using the product.

Do not mount the Desk Base of the Willow Arm on an unstable surface or any surface that could not mount the Desk

Base rmly.

During installation, beware of the recoil of the Willow Arm body when attaching or detaching the monitor to the Willow

Arm. To prevent damage or injury when changing the monitor, always raise the Arm to its highest position before the

monitor is detached. The Willow Arm can support monitors from 1 to 14 pounds.

Do not attempt to disassemble, service or modify the product.

Use only a slightly damp cloth to clean the Willow Arm surface. Never use ammable solvents like alcohol, benzene,

thinner, etc. on the product.

Willow

Installation Instructions

Desk Base

Qty: 1

⅜" x 16 x 3½" Button

Head Allen Cap Screw

Qty: 1

⅜" Steel

Washer

Qty: 1

Willow Arm Assembly

Qty: 1

Pivot

Qty: 1

Plastic Pivot

Washer

Qty: 1

Quick Release

Bracket

Qty: 1

M4 x 18

Phillips Screws

Qty: 4

10mm Plastic

Spacers

Qty: 4

⅜” x 16 x 4½"

Threaded Stud

Qty: 1

Parts grouped as shipped

M4 x 12

Phillips Screws

Qty: 4

M4 x 8 Phillips

Screws

Qty: 4

Pivot Cover Cap

Qty: 1

/16" Allen

Wrench

Qty: 1

/32" Allen

Wrench

Qty: 1

⅛" Allen

Wrench

Qty: 1

U-Bracket

Qty: 1

WA1000-G-S only WA1000-C-S only

M8 Flat Head Cap Screw

M4 8mm Screw M4 12mm Screw

M4 16mm Screw Spacer

Plastic Cap 7/32” Allen Wrench

1/8” Allen Wrench

Button Head Allen Cap ScrewPivot Pin

Steel WasherPlastic Pivot Washer

M8 Flat Head Cap Screw

M4 8mm Screw M4 12mm Screw

M4 16mm Screw Spacer

Plastic Cap 7/32” Allen Wrench

1/8” Allen Wrench

Button Head Allen Cap ScrewPivot Pin

Steel WasherPlastic Pivot Washer

M8 Flat Head Cap Screw

M4 8mm Screw M4 12mm Screw

M4 16mm Screw Spacer

Plastic Cap 7/32” Allen Wrench

1/8” Allen Wrench

Button Head Allen Cap ScrewPivot Pin

Steel WasherPlastic Pivot Washer

M8 Flat Head Cap Screw

M4 8mm Screw M4 12mm Screw

M4 16mm Screw Spacer

Plastic Cap 7/32” Allen Wrench

1/8” Allen Wrench

Button Head Allen Cap ScrewPivot Pin

Steel WasherPlastic Pivot Washer

¼" x 20 x ⅜"

Phillip Flat

Head Screws

Qty: 2

M8 Flat Head Cap Screw

M4 8mm Screw M4 12mm Screw

M4 16mm Screw Spacer

Plastic Cap 7/32” Allen Wrench

1/8” Allen Wrench

Button Head Allen Cap ScrewPivot Pin

Steel WasherPlastic Pivot Washer

M8 Flat Head Cap Screw

M4 8mm Screw M4 12mm Screw

M4 16mm Screw Spacer

Plastic Cap

7/32” Allen Wrench

1/8” Allen Wrench

Button Head Allen Cap ScrewPivot Pin

Steel WasherPlastic Pivot Washer

M8 Flat Head Cap Screw

M4 8mm Screw M4 12mm Screw

M4 16mm Screw Spacer

Plastic Cap

7/32” Allen Wrench

1/8” Allen Wrench

Button Head Allen Cap ScrewPivot Pin

Steel WasherPlastic Pivot Washer

M8 Flat Head Cap Screw

M4 8mm Screw M4 12mm Screw

M4 16mm Screw Spacer

Plastic Cap

7/32” Allen Wrench

1/8” Allen Wrench

Button Head Allen Cap ScrewPivot Pin

Steel WasherPlastic Pivot Washer

M8 Flat Head Cap Screw

M4 8mm Screw M4 12mm Screw

M4 16mm Screw Spacer

Plastic Cap 7/32” Allen Wrench

1/8” Allen Wrench

Button Head Allen Cap ScrewPivot Pin

Steel WasherPlastic Pivot Washer

Upper Clamp

Bracket

Qty: 1

⅜" x 16 x 3½"

Hex Bolt

Qty: 1

Lower Clamp

Bracket

Qty: 1

Plastic

Clamp Knob

Qty: 1

Plastic

Clamp Pad

Qty: 1

⅜" Steel

Washer

Qty: 1

⅜" x 16

Hex Nut

Qty: 1

M8 Flat Head Cap Screw

M4 8mm Screw M4 12mm Screw

M4 16mm Screw Spacer

Plastic Cap 7/32” Allen Wrench

1/8” Allen Wrench

Button Head Allen Cap ScrewPivot Pin

Steel WasherPlastic Pivot Washer

M8 Flat Head Cap Screw

M4 8mm Screw M4 12mm Screw

M4 16mm Screw Spacer

Plastic Cap 7/32” Allen Wrench

1/8” Allen Wrench

Button Head Allen Cap ScrewPivot Pin

Steel WasherPlastic Pivot Washer

M8 Flat Head Cap Screw

M4 8mm Screw M4 12mm Screw

M4 16mm Screw Spacer

Plastic Cap 7/32” Allen Wrench

1/8” Allen Wrench

Button Head Allen Cap ScrewPivot Pin

Steel WasherPlastic Pivot Washer

M8 Flat Head Cap Screw

M4 8mm Screw M4 12mm Screw

M4 16mm Screw Spacer

Plastic Cap 7/32” Allen Wrench

1/8” Allen Wrench

Button Head Allen Cap ScrewPivot Pin

Steel WasherPlastic Pivot Washer

Summary of content (4 pages)

PAGE 1
Willow Installation Instructions TM Important Safety Instructions Read and understand all these safety instructions before using the product. Do not mount the Desk Base of the Willow Arm on an unstable surface or any surface that could not mount the Desk Base firmly. During installation, beware of the recoil of the Willow Arm body when attaching or detaching the monitor to the Willow Arm.
PAGE 2
Verify that you have all the hardware and tools needed for the assembly Check your packages against the parts list on page 1 to verify that you have all the parts needed. You will also need the following tools: #3 tip Phillips screwdriver 1 a Assemble Base a Clamp Mount: WA1000-C-S only To assemble Clamp, thread Hex Bolt (S) through Knob (T) and Upper Clamp Bracket (P) and tighten securely. Press the Plastic Clamp Pad (U) onto the end of the Hex Bolt.
PAGE 3
Attach to Monitor Important Note It is strongly recommended to use the mounting screws provided by the monitor manufacturer if possible. If longer screws are needed, use either part (C) 18mm long, (D) 12mm long, or (E) 8mm long. NOTE: Always use the shortest screws possible to avoid damage to the monitor. Quick Release Option: a Attach the Quick Release Bracket (B) to the VESA mount holes on your monitor. Use the screws from your monitor if possible. The tab on the bracket should be on the bottom.
PAGE 4
a Cable Management a Upper arm: Insert cables into the recessed area under the upper arm by spreading the clips apart. b Lower arm: Pull cover off the underside of the extension, place cables into recess, then snap cover back on. c Desk Base: If using the Grommet Mount, you can thread cables into the grommet hole using the indentation in the base.