Assembly Instructions for 3-leg Workcenters User guide

Workrite Ergonomics | 800.959.9675 www.workriteergo.com 3

Sierra Pin Workcenters - Assembly Instructions for 2 and 3-leg Tables

Verifythatyouhaveallthehardwareandtoolsneededfortheassembly

Checkyourcartonsagainstthelistonpage2toverifythatyouhaveallthepartsneeded.

Youwillalsoneedthefollowingtools:

#3tipPhillipsscrewdriverordrillbit

IfyoudonothaveaWorkRitetabletop,youwillalsoneeda:

⅛"pilotdrillbit

3-LegTablesOnly:AttachCrossbarstoCenterLegBracketusing

¼-20x⅝"ButtonheadMachineScrewsand

" AllenWrench

For 2-Leg table assembly, please

proceed to Step 3.

Toavoidstrippingthethreads,alwaysinsertand

maketherstfewturnsofthescrewBYHAND

withanAllenwrench,ensuringitisinstraight.