Assembly Instructions for 3-Leg Front-Crank models User guide
8 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Workrite Sierra HX™ 3-Leg Crank Workcenters - Assembly Instructions
9
a
b
Attach and Connect Crank Handle
Attach Crank Handle Assembly (I) to Leg by inserting the short end into the hole in the leg, making
sure that the handle clears the table top when extended.
SecuretheCrankHandleAssemblytotheLeg,usingoneButtonHeadScrew(J).
If you do not have a Workrite tabletop:
Proceed to Step 10.
If you have a Workrite tabletop:
For Workrite tabletops, attach loosely to tabletop using four Pan Head Screws (M). Proceed to
step 11.
c
b
c
J
M
I
a