Assembly Instructions for Front and Top-Crank models Instruction Manual

Workrite Ergonomics | 800.959.9675 www.workriteergo.com 9
Workrite Sierra™ Crank Workcenters - Assembly Instructions
AttachCrankTubesandCrossbarstoLegsandTable
LeftLeg:UseLongEndHexShafttoconnectLegtoCrankTube,insertingshortendofshaftinto
leg and long end into Crank Tube.
RightLeg:UseShortEndHexShafttoconnectLegtoCrankTube,insertingshortendofshaftinto
leg and long end into Crank Tube.
AttachCrossbarstosidelegsusingtwoButtonheadMachineScrewsperleg.Base-only models,
skip to step 6 on page 11.
AttachtopplateofLegstodeskusing10WoodScrewsprovided.Usethelocatingholes.Ifyouuse
anelectricscrewdriver,besureitisonthelowesttorquesettingtoavoidstrippingthethreads.
Skip to Step 7 on page 12.
a
c
M
J
P
I
Left Leg
b
L
a
P
J
H
H
c
b
RightLeg
a
b
c
2
3
To avoid stripping the threads when
attaching crossbars, always insert
and make the rst few turns of
the screw BY HAND with an Allen
wrench, ensuring it is in straight.
2-leg Top-Crank Tables:Layoutthemajorpieces
Placementofthelegsisveryimportant.Takethetimenowtolayoutthelegs,crossbarsandcrank
tubesintheproperlocation.NotethattheRightLegwillbeonyourleftandviceversawhenthe
assembly is upside down.
a
I
B
H
B
A
RightLeg Left Leg
I