Assembly Instructions for Front and Top-Crank models Instruction Manual

Workrite Ergonomics | 800.959.9675 www.workriteergo.com 3
Workrite Sierra™ Crank Workcenters - Assembly Instructions
H
Crossbar
Qty: 1
A
 Tabletop(sizeandshapedifferforeachmodel)
Qty: 1
B
Leg
Qty: 2
K
5
/
32
"AllenWrench
Qty: 1J
 ¼-20x⅝”Button
headMachineScrews-
Qty: 4
N
Crank Handle Assembly
Qty: 1
P
 #12x¾"Phillips-
headScrews
Qty: 20
OR
Parts grouped by carton
2-leg tables
M
Long End Hex
Shaft
Qty: 1
L
 ShortEndHex
Shaft
Qty: 1
O
Crank Handle
Connector
Qty: 1
1
Verifythatyouhaveallthehardwareandtoolsneededfortheassembly
Checkyourcartonsagainstthelistsonpage2and3toverifythatyouhaveallthepartsneeded.
Youwillalsoneedthefollowingtools:
#2tipPhillipsscrewdriverordrillbit
#3tipPhillipsscrewdriverordrillbit
IfyoudonothaveaWorkritetabletop,youwillalsoneeda:
⅛”pilotdrillbit¾”wingtypewooddrillbit
Top-crank models only
For3-leg90ºtables,pleaseproceedtoStep2onpage4.
For3-leg120ºtables,pleaseproceedtoStep2onpage6.
For2-legfront-cranktables,pleaseproceedtoStep2onpage8.
For2-legtop-cranktables,pleaseproceedtoStep2onpage9.
or
I
Crank Tube
Qty: 1
Q
Crank Handle
Qty: 1
¾
P
 #12x¾"Phillips-
headScrews
Qty: 20