Assembly Instructions for Front and Top-Crank models Instruction Manual

12 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Workrite Sierra™ Crank Workcenters - Assembly Instructions
HANDLE UP AND OUT
HANDLE DOWN AND OUT
HANDLE UP AND IN
HANDLE DOWN AND IN
HANDLE UP AND OUT
HANDLE DOWN AND OUT
HANDLE UP AND IN
HANDLE DOWN AND IN
7
a
b
c
TightenAllScrewsandFlipTableOver
TightenallWoodScrewsconnectinghandleandlegstodesk.
FliptableoverandadjustLevelingGlidesifrequiredsothattableissteadyanddoesnotrock.
Top-Crankmodelsonly:InsertCrankHandleintoholeinworksurfaceover
therightlegsothatitengagesthegearbox.TurnHandletoraiseorlowertable.
8
Front Crank models only: Store Crank
Pulloutandturnhandletoraiseorlowertable.
Beforestoringthecrankunderthedesk,liftthehandleslightlyhigherthanthedeskbeforepushing
backdowntotheproperposition.Ifitistoolowtobeginwithandisraisedonlyslightlyitwilltend
to drop.
Pushthecrankunderthedesktopforstorage.
a
b
c
b
c