Owner's manual

Lincoln Under-cabinet Light Installation Instructions
Workrite Ergonomics | 800.959.9675 www.workriteergo.com 7
Troubleshooting Tips
The Lincoln Under-cabinet Light will not turn on
• Check all wire and cable connections. Make sure they are
completely and fully engaged.
• Check that the jumper cables or power adapter cables have
not come loose from their connectors
• Make sure that the Transformer is plugged into the wall.
• If a daisy chain, ensure the correct transformer is used for
the number of LEDs in the chain. All transformers should
be Class 2, 12V transformers. Refer to the Table in Step 2
for required current ratings.
• Check that the outlet has power.
The Lincoln Under-cabinet Light ashes on and off
• Unplug the transformer and locate the label. Make sure
that the transformer is ONLY a Class 2, 12V transformer
at 1A (1000mA), 2A (2000mA), or 4A depending on how
many LEDs are connected.
The Lincoln Under-cabinet Light dims or goes out.
• Make sure there are not too many lights in the daisy chain
for the rating of the transformer. Refer to the Table in Step
2 for guidance.
• Check all wire and cable connections. Make sure they are
completely and fully engaged.
• Check that the outlet has power.
The Lincoln Under-cabinet Light will not turn on when I
come back into the work area
• The occupancy sensor has a listed range of 15’. However,
if a lip of the cabinet or other object blocks the full view
of the sensor, then it may have trouble detecting the
presence of a person in the work area. Reposition the light
to have a better view of the work space.