Owner's manual

Lincoln Under-cabinet Light Installation Instructions
Workrite Ergonomics | 800.959.9675 www.workriteergo.com 5
2
Connect Jumper Units to Parent Unit
(if applicable)
Secure Jumper Cable (E) between the plug side of the
Parent Unit and the Jumper Unit. The cable should snap
into place.
a
Note: To remove Jumper Cable, depress the clip on
the side of the plug and pull gently from the xture.
Maximum Daisy-chained units: Number of xtures within same chain
2A under 48" of lights or 3 lights max
4A under 120" of lights or 5 lights max
CAUTION
The number of lights that can be
daisy-chained together depends
on the size of the lights and the
size of the transformer. Do not
exceed the total number of lights for each
of the transformer sizes listed:
!
E