User Manual
8 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Fino Installation Instructions
Connect Daisy Chain Jumper units:
BEFORE PLUGGING INTO WALL connect all lights
7
Use Cable Clips(I) as needed to secure cord.
b
Connect later Finos together using 2-prong jumper cables or Connector (M).
a
Plug power cord into Transformer.
c
Plug in
M
I
a
c
Replacement parts
12", 24" & 48" Daisy Jumper Cords, xx" (xx = 12, 24, or 48) .................................................. FIN-DCxx96
1" Daisy Chain Connector ................................................................................................... FIN-DC01
Max 2.0A (48 watt) transformer .......................................................................................... FIN-T48
Fino hardware pack (contains qty 3 each of parts C, E and F, 4 of D, and qty 9 of G) .................. VER-HDWR
b
Maximum Daisy-chained units: Numberofxtureswithinsamechain
FIN-24 1 1 2 1 1 1 2 2 3 2 3 3 4 5
FIN-36 1 1 2 1 2 1 2 3 2 1
FIN-48 1 1 2 1 2 1 1 1
Total/Chain 2 2 2 2 2 2 3 3 3 3 3 3 3 3 4 4 4 4 5
CAUTION
If connecting multiple
units in a daisy chain, to
reducetheriskofre,
electric shock or injury to
persons, see table of maximum daisy
chained units at right.
!
Plug power cord into wall. Position light away from your eyes, and turn on.
d
d
Make sure all connections
are complete and secure!
!