Instructions / Assembly

Assembly Instructions - Important:

Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when

assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or

information on other products, please visit our website: www.avesix.com or call or write us.

Step 1

FEATURES

3 - (Base w/ Casters) - 1 Piece

1 - (Chair Body) - 1 Piece

2 - (Pneumatic Cylinder) - 1 Piece

• PNEUMATIC SEAT HEIGHT ADJUSTMENT

To raise seat, remove pressure from seat and pull lever (1) up. To lower seat, sit

on chair and pull lever (1) up.

NOTE: It is normal for chair to slightly lower under body weight.

• LOCKING TILT ADJUSTMENT

For individual comfort, this chair has been equipped with an adjustment that will

allow the user to change the tension of the tilting feature. Turn knob (2) clockwise

to increase tension and counter-clockwise to decrease or ease the tension. To

lock, return chair to the upright position and push lever (1) in. To unloci,

pull lever (1) out.

NOTE: Be careful not to loosen back tilt adjustment knob completely.

TND940

TND941

IMPORTANT: PLACE CHAIR BODY (1) ONTO PNEUMATIC CYLINDER (2) &

APPLY DOWNWARD PRESSURE. BE SURE CHAIR IS SECURE BEFORE USING