How to Guide

© Office Star Products December 2013
2
1
PA RT QTY
1. Base .......................1
2. Casters .....................5
3. Pneumatic Cylinder ............1
4. Bellows .....................1
5. Mechanism ..................1
6. Seat Cushion .................1
7. Back Cushion ................1
8. Arms (8L & 8R) ...............2
9. Short Screws .................4
10. Long Screws ................8
11. Plastic Caps .................8
12. Allen Wrench (not shown) ......1
OPH61601 / OPH61606 / OPH61607
EXECUTIVE ECO LEATHER CHAIR
ASSEMBLY INSTRUCTIONS
4
10
9
8L
8R
6
5
STEP 1 STEP 2 STEP 3
STEP 4
11
3
7
STEP 5
10
6
3
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place.
Insert Pneumatic Cylinder (3) into Base (1).
STEP 2 Attach Mechanism (5) to Seat Cushion (6) with the arrow towards the front of the chair using four Short Screws (9).
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (12).
STEP 3 Attach Arms (8L & 8R) to Back Cushion (7) using two Long Screws (10) for each Arm (8R & 8L).
DO NOT FULLY TIGHTEN SCREWS.
STEP 4 Attach Arms (8L & 8R) to Seat Cushion (6) using two Long Screws (10) for each Arm (8R & 8L). FULLY TIGHTEN ALL SCREWS
USING ALLEN WRENCH (12). Cover holes in Arms (8L & 8R) using four Plastic Caps (11) for each Arm (8).
STEP 5 Place the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
11
8R
8L