Instructions / Assembly

Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous assurer que les quantités
des pièces sont correctes.
ÉTAPE 1 Insérer cinq Roulettes (2) dans la Base (1), les pousser très fort jusqu’à ce que vous entendiez ou sentiez la Roulette (2) s’enclencher. Insérer le
Vérin pneumatique (3) dans la Base (1) et glisser les Soufflets (4) sur le Vérin pneumatique (3).
ÉTAPE 2 Fixer les Bras (8L et 8R) au Coussin du siège (5) et Coussin du dossier (7) avec quatre Vis pour les bras (9) pour chaque
Bras (7). RESSERRER COMPLÈTEMENT TOUTES LES VIS AVEC CLÉ ALLEN (12). Couvrir les trous des
Bras (8L et 8R) avec quatre Bouchons en plastique (11) pour chaque Bras (8).
ÉTAPE 3 Fixer la Plaque du siège (5) au Coussin du siège (6) avec la flèche vers l’avant du siège avec quatre Vis pour plaque de siège (10).
RESSERRER COMPLÈTEMENT TOUTES LES VIS AVEC CLÉ ALLEN (12).
ÉTAPE 4 Insérer le vérin pneumatique (3) dans la base (1). Placer le siège assemblé sur le vérin pneumatique (3)
et mettre de la pression vers le bas.
ATTENTION : AVANT D’UTILISER LE FAUTEUIL, VOUS ASSURER D’AVOIR RESSERRÉ COMPLÈTEMENT TOUTES LES VIS.
FL660
EXECUTIVE FAUX LEATHER CHAIR
OPERATING INSTRUCTIONS
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Do not overturn back tilt knob when decreasing
tension.
5. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1).
To lower seat height sit on chair and lift lever (1).
NOTE: It is normal for chair to slightly lower under
body weight.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped with
an adjustment that will allow the user to change the tension
of the tilting feature. Turn knob (2) clockwise to increase
tension and counter-clockwise to decrease or ease the
tension. To lock return chair to the upright position and push
lever (1) in. To unlock pull lever (1) out.
NOTE: Be careful not to loosen the back tilt adjustment knob
completely.
1
2
FL660
FAUTEUIL DE DIRECTION EN SIMILI-CUIR
INSTRUCTIONS DE MONTAGE
ÉTAPE 1
ÉTAPE 4
ÉTAPE 2 ÉTAPE 3
PIÈCE QTÉ
1. Base .......................1
2. Roulettes ....................5
3. Vérin pneumatique ............1
4. Souflett .....................1
5. Plaque du siège ...............1
6. Coussin du siège ..............1
7. Coussin du dossier ............1
8. Bras (8L et 8R) ...............2
9. Vis pour les bras ..............8
10. Vis pour plaque de siège .......4
11. Bouchons en plastique ........8
12. Clé Allen (non montré) .........1
1
6
2
3
4
5
7
10
9,11
10
8L
8R
6
3
© Office Star Products avril 2017
WORK SMART LIMITED WARRANTY
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. The BC9601 is for persons weighing 300 lbs. or less. The BC9602 is for persons weighing 400 lbs. or less. The BC9603 is for persons weighing 500 lbs.
or less. EX1098, EC1283C & ECH12801 are for persons weighing 350 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse,
negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover
cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting
from use of this product. When usage is more than 40 hours per week, a two year warranty on all parts applies. Fabric is warranted for one year. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
All Work Smart chairs are built to meet or exceed ANSI BIFMA standards.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.