User Manual

5User’s Guide
• Do not dispose of electrical products with household
waste. Waste electrical products should not be
disposed of with household waste. Please recycle
where facilities exist. Check with your local authority
or retailer for recycling advice.
• To replace a damaged power supply cord (Type Y),
your power tool must be returned to the Service Center.
Specific Safety Rules
• WARNING! ALWAYS use proper safety glasses.
Everyday eyeglasses are NOT safety glasses. Also use face or
dust mask if operation is dusty. ALWAYS WEAR CERTIFIED
SAFETY EQUIPMENT:
• WARNING! This product contains chemicals known to the State of
California to cause cancer, birth defects or other reproductive harm.
• Some dust created by power sanding, sawing, grinding, drilling and
other such activities contains chemicals or particulates harmful to
humans.
• Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these
chemicals, work in a well ventilated area, and work with approved
safety equipment, such as dust masks that are specially designed
to fi lter out airborne microscopic debris.
• WARNING! Use of this tool can generate and/or disperse dust,
which may cause serious and permanent respiratory or other
injury. Always use NIOSH/ OSHA approved respiratory protection
appropriate for the dust exposure. Direct particles away from face and
body.
• CAUTION! Wear appropriate hearing protection during use.
Under some conditions and duration of use, noise from this product
may contribute to hearing loss.
• Hold tool by insulated gripping surfaces when performing an
operation where the abrasive belt may contact hidden wiring or
its own cord. Contact with a “live” wire will make exposed metal
parts of the tool “live” and shock the operator.
• Always hold tool fi rmly.