User Guide

ManualsBrandsWork Sharp ManualsBlade SharpenersCombo Knife Sharpener

Setting up your sharpener

Your sharpener is ready to use right out of the box, just plug it in and turn it on.

Getting Started

Anatomy of a Knife:

Thank you for purchasing this tool!

Your support makes a real impact on our small business.

We are condent you will be very pleased with your purchase.

If that is not the case, please contact us.

We know you work hard for your money and we want to provide you with

a high performance, high value tool.

Please keep in touch and let us know how we’re doing.

Until then, stay sharp out there…

- Team Work Sharp, Ashland Oregon

Handle

Spine

Finger Guard

Heel

Edge

Tip

Blade

Summary of content (5 pages)

PAGE 1
Thank you for purchasing this tool! Your support makes a real impact on our small business. We are confident you will be very pleased with your purchase. If that is not the case, please contact us. We know you work hard for your money and we want to provide you with a high performance, high value tool. Please keep in touch and let us know how we’re doing.
PAGE 2
SHARPENING YOUR KNIVES Turn Power switch to the “on” position. Make 10 Strokes alternating from side-to-side for a total of 5 per side of the blade, using the right and left sharpening guides. Proper Knife Sharpening Position Place knife in the Sharpening Guide so that the blade is in the bottom of the slot and it is resting against the Amber Line. Insert knife blade all the way to the Heel of the blade, the Finger Guard or up to the first serration on a combination blade.
PAGE 3
HONING YOUR KNIVES Turn power switch to the “off” position for honing. Start on the upper Honing Guide and perform 10 alternating strokes, for a total of 5 per side, using the upper and lower Honing Guides. Proper Position for Honing on the Ceramic Rod A. Place knife flat on the Amber Honing Guide to establish honing angle. B. Maintain honing angle and use light pressure to slide the entire length of the knife smoothly and steadily across the ceramic rod.
PAGE 4
Re-Sharpening Your Knives Unless your knives have been damaged or heavily used since their first sharpening, they will only require a touch-up sharpening on the ceramic rod. Follow the ‘Honing Your Knives’ instructions to re-establish a sharp edge. If they are not as sharp as you want, return to "Sharpening Your Knives" instructions and perform 6 strokes (3 per side) and then finish on the honing rod for 10 strokes (5 per side). Maintenance Keep your sharpener clean and free of debris.
PAGE 5
Warranty and Service We are reasonable people, so if you have an issue with your sharpener please contact us to make it right. Do not expect a fight, we are here to help and ensure you get a quality tool that delivers on our promise. We have replacement service parts available should your sharpener need repair. Please visit our website for video tips, techniques and to learn more about your new sharpener and our other products. About us We are proud to be assembling our tools in the USA.