Product Manual

10
1. Pull open the front cover of the unit. Cover
is secured with magnet.
2. Press down on the tensioner, located
behind the top, large pulley (wheel).
3. Holding tensioner down, slide belt off.
4. Lift up tensioner to find extra belt storage.
5. To install new belt, hold tensioner down
and slide belt around all 3 pulleys
(wheels).
For more info about belts, see SHARPENING
BELT INFORMATION section.
CHANGING/REPLACING BELTS
ON
OFF
Belts
Belt Tensioner
1. Push back on guide from the front of the
sharpener until the guide snaps out of
place.
2. Lift the guide to remove.
TIP 1: Remove guides to clean debris on the leather
liner with a dry cloth or brush.
TIP 2: Remove right or left guide to access scissor
guide. See sharpening scissor section for more detail.
3. To reinstall guide, align screw with hole on
sharpener.
4. Push the guide forward toward the front
of the sharpener until it snaps into place.
Make sure it is flush with the sharpener.
The E5 Upgrade Kit includes
expandable sharpening capabilities
with 15° EAST GUIDES and 20°
WEST GUIDES (sold separately).
REMOVING GUIDES