User guide

86 Troubleshooting
• Press the




VF button on the remote and set to the correct
resolution.
576i/576p/720/1080i/AUTO. You may need to press the




VF button multiple times to cycle through all the differ-
ent formats. All formats will be displayed on the front
screen of the Toppro.
When the Service Scan is finished I get zero channels
• Make sure the antenna is plugged into the wall socket.
• Check that there is a signal coming from the antenna by
connecting it directly to the TV or another device.
• You must have signal strength between 50%–90%
• Indoor antenna is not recommended as the signal is not
enough to display channels when a service is scanned.
I get a pixilated image on the my Television
• Check the plug on the Toppro and on the wall making
sure that it’s a tight connection.
• Check that there is a signal coming from the antenna by
connecting it directly to the TV or another device.
• You must have signal strength between 50%–90%
Can not receive or adjust sound through Toppro unit
• Adjust volume using the




VOLUME− and the




VOLUME+
on the Toppro Remote.
• Use the TV remote to adjust the sound to approx 50%
then use the Toppro remote to adjust volume.
• Check the connection between the TV and the Toppro
product.
• Make sure you are in the correct AV on the TV