User guide

46 Recording and Playback

back into standby mode again in one minute. However, if you

press any button on the remote control or on the front panel

even just one time, the digital receiver will not switch into

standby mode.

To add a timer recording, se-

lect the Recording > Reserva-

tion menu, then the timer list will

be displayed. To add a new timer

event, press the









F1 button, and

a box like the left ﬁgure appears.

Take the following steps:

1. Set the Record option to On to make a recording. If this

option is set to Oﬀ, the digital receiver will turn on at the

speciﬁed time but not record; instead, you may record

with your video recorder or suchlike in this case.

2. You may have four sources for recording: TV, radio, the

video from the external device linked to the Compos-

ite video input, and the video from the external device

linked to the Component video input. Set the Type op-

tion to your desired source.

3. Set the Service option to the service which provides the

programme you want. Pressing the









OK button on this

option displays a services list, from which you can select

your desired service.

4. Set the Mode option as you desire. There are ﬁve timer

modes:

One Time means literally ‘one time’.

Every Day means literally ‘every day’.

Every Weekend means ‘Saturday and Sunday every week’.

Weekly means ‘one day every week’.