User guide

14 Setup

You need to obtain a Composite cable (RCA

cable) to use the Composite connector. Plug

one end of the cable into the VIDEO (yellow),

AUDIO L (white) and AUDIO R (red) sock-

ets on the digital receiver, and plug the other

end into the matching socket on your video

recorder or suchlike.

You need to obtain a Component video cable

(RCA cable) to use the Component video con-

nector. Plug one ends of the cable into the Y

(green), Pb (blue) and Pr (red) sockets on the

digital receiver, and plug the other ends into

the matching sockets on your television.

NOTE

You can use only 576i or 576p at 50 Hz in Component input

connector. (AV-IN YPbPr)

To switches the output between the digital receiver and the de-

vice connected to the AV-IN sockets, press the









M button or al-

ternatively select the Entertainment > Analog Input menu.

When you select the Analog Input menu, you have to select be-

tween Composite and Component. To use the Composite con-

nector, select the Composite; otherwise, select the Component

to use Component connector.

NOTE

When using the AV IN sockets, the input data will be dis-

played one second later than the original input data.

(AV Input Audio Level : 2.0 Vrms at maximum)