Specifications

D-1
APPENDIX D: ZVD Summary of Default Program Codes
Group 0: User Parameters
Factory
Parameters Explanation Settings Default
Setting
0-00 Identity Code of Drive Read-only #
0-01 Rated Current Display Read-only ##.#
0-02 Parameter Reset d10: reset parameter to factory setting 0
d0: F (setting frequency)
d1: H (actual frequency)
0-03 Start-up Display of AC d2: u (user-defined unit)
Drive ★ d3: Multi Function Display 0
d4: FWD/REV
d0: Display output current (A)
0-04 Content of Multi Function d1: Display Counter Value (C)
Display d2: Display Process Operation (1. tt)
d3: Display DC-BUS Voltage (U)
d4: Display output voltage (E) 0
d5: Output power factor angle (n.)
d6: Display output power (kW)
d7: Display motor speed (r)
d8: Display estimated torque ratio (T)
d11: Display motor tachometer
0-05 User-Defined Coefficient K ★ 0.01 to 160.00 1.00
0-06 Software Version Read-only ###
0-07 Password Input 0 to 65535 0
0-08 Password Setting 0 to 65535 0
d0: V/F control
0-09 Control Methods d1: V/F Control + PG 0
d2: Vector Control
d3: Vector Control + PG
★ Can be set during operation