Technical data

43
WPD 163
Power distributor
WPD 1253 B
Power distributor
WPD 1253 B is the most powerful power distributor of the WPD series. It fea-
tures a three-phase input connector (3P+N+T) to operate with a high current
level (125 A). Four three-phase connectors are available at the output, with 63
A per phase. There are many possible combinations: 3 outputs with 125 A in-
puts, 2 outputs with 63 A inputs (full capacity) or 4 outputs with 3x32 A inputs.
Its residual current circuit breaker (RCCB) disconnects the circuit whenever it
detects that the electric current is not balanced between the energized con-
ductor and the return neutral conductor. It is designed to disconnect quickly
enough to prevent injury caused by such shocks.
FEATURES
- Three-phase power distributor (3x125 A input).
- Input with 125 A CEE connector (3P+N+T).
- 4 x 64 A CEE connector (3P+N+T) with protection lid.
- Triple circuit breakers of 63 A on each output.
- 4x32 A circuit breakers for residual current.
- Residual current circuit breaker (RCCB).
- Dimensions: 5 rack units.
POWER DISTRIBUTORS
This power distributor designed in a 19” rack format features a 16 A three-phase connector
(3P+N+T) and 6 schuko connectors for output (16A each).
It has a protection circuit-breaker on each phase and an additional schuko connector for
auxiliary supply. Additionally, it provides digital voltmeter and amp-meter for each phase to
visualize current levels.
FEATURES
- Three-phase power distributor (3x16 A per input).
- 6 x 16 A schuko connectors (2 per phase).
- Additional schuko connector on front panel
- Digital voltmeter and amp-meter for each phase.
- Protection circuit-breaker on each phase.
- Dimensions (WxHxD): 483 x 88 x 210 mm.
- Weight: 3.8 kg.
catalogo_iluminacion_2013.indd 43 09/09/2013 17:13:19