Technical data

38
LPX 12 DMX
Lighting driver
This 12 DMX/Analog channel driver and chaser
is particularly useful to activate lights and to turn
on/off lighting effects.
Users can edit start channel address. Analog
signals have priority over DMX signals.
FEATURES
- Microprocessor for control and regulation.
- Large LCD display for data.
- Highly precise regulation.
- Protections against overload, overvoltage or output short-circuit.
- Time delay circuit con gurable between 3 and 6 sec.
FEATURES
- 12 DMX/analog channel driver and chaser.
- Analog signals have priority on DMX ones.
- Channel autocheck function.
- Output channels: 5 A per channel.
- Memory against power supply failure.
- Mains supply: AC 220-240 V, 50 Hz.
- Dimensions (WxHxD): 483 x 90 x 240 mm.
- Weight: 4.92 kg.
Voltage regulators
EST 2 K
EST 1 K
These two voltage regulators keep output voltage constant at a predetermined value, with an input
voltage that constantly oscillates between 140 and 250 V AC. Depending on the model, it is possible
to connect loads of 1000 W (EST 1 K) or 2000 W (EST 2 K).
Many features are available to ensure output signal integrity, with protections against overload, over-
voltage or output short-circuit. An additional rearmable fuse is available on rear panel.
Time delay circuit (between 3 and 6 sec.) avoids noises coming from the interrupter before the nor-
mal operating mode starts. A large display shows information like input, output and current voltage.
VOLTAGE REGULATORS
Technical data EST 1 K EST 2 K
Load capacity: 1000 VA. 2000 VA.
Main supply: AC 140-250 V . AC 140-250 V .
Output: AC 220 V ±3%. AC 220 V ±3%.
Frequency: 50 Hz / 60 Hz. 50 Hz / 60 Hz.
Time delay: 3 to 6 sec. 3 to 6 sec.
Dimensions (WxHxD): 150 x 242 x 180 mm. 150 x 242 x 180 mm.
Weight: 6.6 kg. 8.16 kg.
catalogo_iluminacion_2013.indd 38 09/09/2013 17:12:28