Technical data

37
MINIDIM RGB
LED driver
DMX PATCHER
DMX addressing and
signal buffer
MINIDIM RGB features three channels (R,G,B) and it includes eight programs, with
control over Speed and Brightness. It supports loads up to 6 A.
Two operating modes are available: DMX (to control start address channel) and Manual
(to manage directly the output intensity or to set a program in stand alone mode).
Thanks to its DIN rail format, it is very easy to install it in any installation.
As its name suggests, DMX PATCHER is a device that
patches the input DMX signal from a determined channel
(previously con gured) to another output channel.
Thanks to this function, it is possible to assign a new DMX
channel to  xtures with a determined DMX channel (not
con gurable).
Boosted DMX frame: Each DMX PATCHER is connected
to a PSU. This allows boosting DMX frame.
CONNEXION EXAMPLE
Two DMX channels (channel
4 and channel 10) are used in
order to set two con gurations.
Users only need to select
the input channel using the
DIP switches of each DMX
PATCHER unit. The  xtures of
the installation (Colourizer DMX)
have a preset start channel (1).
Zone A
Zone B
DMX frame
DMX PATCHER
COLOURIZER DMX COLOURIZER DMX COLOURIZER DMX COLOURIZER DMX
DMX PATCHER DMX PATCHER DMX PATCHER
Input channel 10
with start channel 1 with start channel 1 with start channel 1 with start channel 1
Input channel 10 Input channel 4 Input channel 4
DMX
console
Up to 100 LED LINE 10
per output (two lines with 50 units max)
Up to 100 LED LINE 10
per output (two lines with 50 units max)
DMX DRIVERS
Technical data MiniDIM RGB
Number of channels: 3.
Max. load: 6 A.
Control signal: DMX 512.
Connexion: Terminals.
Main supply: DC 12-24 V 6.5 A max.
Dimensions (WxHxD): 66 x 84 x 30 mm.
Weight: 270 g.
Technical data DMX Patcher
Input connexion: Terminal blocks (3 pin).
Output connexion: Terminal blocks (3 pin).
Main supply: DC 12/24 V, 100 mA.
Dimensions (WxHxD): 88.2 x 45.7 x 16.6 mm.
Weight: 250 g.
catalogo_iluminacion_2013.indd 37 09/09/2013 17:12:21