Technical data

34
This lighting tool controls 4 DMX strobes with up to 4
channels and/or 4 analog strobes.
It features 20 chase programs (19+1 audio) and several
operating modes: Audio, Program, Speed and Dimmer.
Users can easily edit parameters (speed, audio inten-
sity and dimmer level) and use the functions Stand By
and Full On. It is also possible to select the format of
trigger signals.
FS 4 DMX additionally provides Line output connexion
(up to 100 mV) for audio mode and input polarity
selector for DMX operating mode.
This interesting tool for lighting engineers converts
DMX and MIDI signals into Analog signals, with up to
72 channels. Analog signals are sent through SUB-25
connectors. DIP switches are available to edit polarity
and set input voltage (DC +10V, DC +15V or DC +20V).
C 72 DMX allows using an analog dimmer with DMX
consoles, setting parameters like DMX start address
channel, MIDI note selection, etc. It also works as a
chaser with adjustable speed to record and program
scenes from a DMX console.
Thanks to the Hold function, C 72 DMX memorizes the
last DMX con guration, even in cases of failure of the
current system.
FEATURES
- DMX strobe controller with up to 4 channels
and/or 4 analog strobes.
- 20 chase programs.
- Audio mode for recorded scenes.
- 4 analog outputs for trigger pulses.
- Edition of speed, audio intensity and dimmer.
- Stand By and Full On functions.
- Memory against current failures.
- Mains supply: DC 9 V, 500 mA (included).
- Dimensions (WxHxD): 483 x 44 x 76 mm.
- Weight: 1.2 kg.
FEATURES
- DMX to analog signal converter.
- 72 channel chaser operating mode.
- Adjustable voltage level for outputs
(DC 10, 15, 20 V).
- Voltage polarity selector.
- Programmable DMX start address channel.
- Programmable chase speed.
- Memory against current failures.
- Mains supply: AC 230 V, 50 Hz.
- Dimensions (WxHxD): 483 x 44 x 120 mm.
- Weight: 2.3 kg.
C 72 DMX
DMX/MIDI to Analog
converter
FS 4 DMX
DMX strobe
controller
DMX TOOLS
SRD 6 is the new splitter of WORK, housed in one
rack unit. It features 6 channels in order to send
RDM/DMX frames to several devices (moving
heads, scanners, dimmers, LED  xtures, etc.).
It differentiates itself from other splitters with as it is
a bidirectional unit which supports RDM protocol.
It allows con guration, status monitoring, and ma-
nagement of the devices connected to the splitter,
directly from the lighting console.
FEATURES
- Bi-directional 6 channel splitter.
- Supports RDM protocol (Remote Device Management).
- Housed in one rack unit.
SRD 6
RDM/DMX 6 channel
splitter (bi-directional)
catalogo_iluminacion_2013.indd 34 09/09/2013 17:12:05