Technical data

DMX splitters

IS SERIES

These two DMX splitters have been designed to send DMX signal to

several lighting  xtures (moving heads, scanners, dimmers, LED  xtu-

res, etc.), achieving total isolation between input and output.

IS 2 features two output connectors (XLR 3 Pin), whereas IS 6 features

6 output terminal blocks. It is easy to hide them behind false ceilings

and walls thanks to their small size and  xation points. They have an

additional terminal block and a connector input for external supply.

DMX TOOLS

CONNEXION EXAMPLE 1

IS 2 receives a DMX signal frame and sends it to its two outputs. The

 rst output is directly connected to moving heads. The second output is

connected to a LM 3E unit that sends the signal to an ArtNet node.

DMX frame

IS 2

Output 1

Output 2

Artnet protocol

LM 3E

CONNEXION EXAMPLE 2

IS 6 receives a DMX signal frame and sends it to its six outputs,

including moving heads, RGB drivers, dimmers and LM 3E units

(DMX to Ethernet emitters).

Artnet protocol

SIDIUS 1200

IS 6

DMX frame

MiniDIM RGB

WD 620 DMX

LM 3E

Technical data IS 2 IS 6

Input: 1 XLR 3 Pin connector. 1 terminal block

Output: 2 XLR 3 Pin connector. 6 terminal blocks

Dimensions (WxHxD): 80 x 45 x 80 mm. 80 x 45 x 113 mm.

Weight: 380 g. 470 g.

catalogo_iluminacion_2013.indd 33 09/09/2013 17:11:58