Technical data

28
LM 4 POWER
LED driver working
through Ethernet
LM 4 Power associates in a unique device two powerful tools: a LED driver through ArtNet and a LED driver through DMX.
LM 4 Power allows designing any RGB LED installations, from conventional lighting installations (a DMX console connected to LM 4 Power input -
using the DMX mode) to integrated lighting system installations working in an Ethernet network with several DMX universes (using the ArtNet node).
Con guration of DMX and ArtNet modes is very easy and allows saving many time:
- Through DMX mode, user only needs to indicate the DMX start address.
- Through ArtNet mode, DIP-switches are available to select the Subnet mask and universe (as well as DMX start address).
LM 4 Power is able to support elevated output power: it features independent colour channels divided into two RGB outputs. Each colour has a
maximum load of 2.5 A, for a total maximum load of 15 A. This is an outstanding feature, taking into account the compact size of the device.
Dimensions (WxHxD): 142 x 45 x 80 mm.
LM 4 POWER FRONT PANEL
It features LAN connexion, group selector and
LED light indicators for DMX signal and Ethernet.
RGB OUTPUTS AND DIP-SWITCH
Two RGB outputs are available (2.5 A per colour /
total 15 A). The DIP-switches allows the selection
of DMX address and Subnet mask, depending on
the operating mode (DMX or ArtNet).
LM 4 POWER IS THE FIRST LED DRIVER
DESIGNED TO WORK THROUGH AN ETHERNET NETWORK.
DMX INTERFACES
catalogo_iluminacion_2013.indd 28 09/09/2013 17:11:15